Levelune
← All articles

Why does Levelune show Fixed instead of a master volume slider?

Identify the selected output and use its own volume control when macOS does not expose an adjustable master level.

By · · Updated

Fixed in Levelune’s Master Volume area means the selected output does not expose an adjustable master level to the app. The master slider and mute control are disabled in that state. It is not the same as a usable slider set to a low value.

Identify which control owns the problem

What you seeNext check
Fixed beside the output nameUse that output device’s own volume control.
A percentage and usable master sliderMake one small master adjustment while listening to a familiar sound.
Only one app is quietCheck its playback and individual app level before changing the whole output.

Trace the actual output

  1. Read the output device name shown with Master Volume.
  2. Confirm it matches where you intend to hear sound. A display, dock or external device may have changed the output path.
  3. If another output was intended, select it in the Mac’s system sound controls, then read the name in Levelune again.
  4. Start at a modest listening level using the control available for that output. Play one familiar source and adjust gradually.

For a hypothetical laptop connected to a display with speakers, the laptop volume control you remember using may not adjust the external path. The device name is the useful clue. Repeatedly moving another app slider will not make a missing master control appear.

Do not reset unrelated settings to test the output

An individual app level controls the balance of that source against others. A master level controls the output when available. Clearing saved app levels is a separate action and can remove a reduction you relied on. Read the reset guide before choosing it; do not use it merely because Fixed appears.

When switching outputs, begin quietly rather than assuming the new device retains the loudness you last heard. Check one change at a time: output selection, output control, then the individual app balance.

Send support a reproducible description

Include the selected output name, whether the label says Fixed or a percentage, whether one app or every app is affected, and the result of one small adjustment. A hypothetical useful report is “External display selected; Fixed shown; music and call audio both loud; display volume control changes both.” It identifies the path without sharing private call recordings.

See Levelune and the app-balancing guide for the separate task of balancing two sources.

Compare the output device and app mix separately

Levelune’s master control follows the Mac’s current system output. Its app rows retain their own saved volume and mute choices. After switching between speakers and headphones, read the output name before comparing the master control with the values you saw earlier.

A device that exposes an adjustable output volume can show a master slider, while another output can show Fixed. That change is not evidence that your saved app settings were erased. Inspect the app’s slider and mute state separately. Conversely, an unchanged app percentage does not mean a newly selected output will sound equally loud.

  1. Lower listening volume using the output’s supported control before a comparison.
  2. Confirm the output name shown by Levelune.
  3. Play familiar audio in one app and note its saved level and mute state.
  4. Adjust the appropriate output control, then the app row if needed, changing one thing at a time.

For a hypothetical case, music remains at 40% in Levelune after changing outputs, but the new headphones sound louder. The unchanged saved app level and different listening result can coexist. Use the new output’s volume control rather than resetting every app’s saved mix to investigate one output change.

When reporting a problem, include both output names, whether each showed a master slider or Fixed, and the app’s level and mute state. Do not describe a missing master slider as missing audio permission without checking the separate access status.

A master-volume adjustment can also clear master mute

On an output that supports it, changing Levelune’s master volume also clears the output’s hardware mute. Do not treat a muted output as a safe way to move the master slider to a high value silently. Begin with a modest setting and expect playback to become audible when you adjust it.

Some adjustable outputs do not expose a separate hardware mute control. For those, Levelune’s master mute action can lower the master level to zero and later restore a remembered level for that output. A zero master value and an app’s own mute button are still separate controls. This behavior does not make a Fixed output adjustable.

  1. Read the selected output name before touching Master Volume.
  2. Start familiar audio and use a low listening level.
  3. If sound returns after moving the master slider, check the individual app mute and level separately rather than resetting the entire mix.

A hypothetical case is a muted speaker output with a music app set to 40%. Moving the master slider can restore output sound while the music app’s own saved setting stays 40%. One control becoming audible does not imply that every app’s mute choice changed.

Sources and further reading